Glassboard magnetic push pins are the oversized members of our push pin family, built for one specific job: holding documents on a glass whiteboard. A standard magnetic pin has plenty of grip on steel — but a glass board puts a layer of glass between the pin and the steel it needs to grip, and pull force falls with every millimetre of that gap. These pins answer with bigger magnets in the same easy-grip philosophy: a smooth knob head, a comfortable curved waist, and a wide flat base that carries the magnet face.
This page covers the GM-T2 family of glassboard magnetic push pins in two sizes: the 19 mm pin at 3.75 lb hold and the 29 mm pin at 4.85 lb, both in four office tones — black, blue, gray and green — at $0.299 and $0.599. Below the spec table you will find the gap physics explained honestly (including why we do not publish a single through-glass number), a small-vs-large chooser, and the care notes that keep a pin useful for years. If your surface is plain steel — fridges, lockers, filing cabinets — the standard magnetic push pins do the job from $0.11.
Both sizes are stock items from 10-million-magnet inventory, listed with the rest of the family in the glassboard magnets category. For the whole family in one view — magnetic push pins, glassboard push pins, pawn magnets and iron button magnets — start at the glassboard magnets guide.
Every one of our glassboard magnetic push pins is built from three parts:
Because the magnet is fully enclosed, glassboard magnetic push pins slide across the board without scratching, stack in a drawer without leaping, and pull off one-handed a hundred times a day. The knob-and-waist shape is not styling: it is what makes a 29 mm pin comfortable to place and lift repeatedly.

Pull figures for these glassboard magnetic push pins are vertical pull-off on thick clean steel, measured the same way as every magnet in our catalogue:
| Model | Diameter | Height | Weight | Pull | Colours | Price |
|---|---|---|---|---|---|---|
| Glassboard pin, small | 0.748 in / 19 mm | 0.984 in / 25 mm | 0.194 oz / 5.5 g | 3.75 lb / 1.7 kgf | 4 | $0.299 |
| Glassboard pin, large | 1.14 in / 29 mm | 1.5 in / 38 mm | 0.564 oz / 16 g | 4.85 lb / 2.2 kgf | 4 | $0.599 |
Reading notes: both sizes of glassboard magnetic push pins share the same knob-and-waist silhouette and the same four tones — black, blue, gray and green — the palette offices actually specify for board-scale work. The large pin carries a visibly bigger magnet and 16 g of weight; on a planning wall, that extra hold is the difference between a calendar that stays put and one that slides.
The physics is the same one that governs every magnet in the catalogue: pull force falls steeply with distance from the steel. On a bare steel surface, a pin's magnet grips directly — the full rating works. On a glass whiteboard, the pin actually grips a steel backing through the glass, and glassboard magnetic push pins lose a large share of their rating crossing that gap. A standard 11 mm pin has too little margin left; these two sizes carry magnets big enough that a useful hold remains at the glass surface.
The honest caveat: exactly how much hold survives depends on your board's glass thickness and backing construction — a 3 mm board and a 6 mm board do not behave the same. We deliberately do not publish a single through-glass number. Tell us your board (or send one), and engineering will measure the hold on the actual surface before you commit to a quantity. The same pull force physics page explains the distance rule that glassboard magnetic push pins are sized around.

The two glassboard magnetic push pins differ only in how much margin they carry through the glass:
| Glassboard pin, small (19 mm) | Glassboard pin, large (29 mm) | |
|---|---|---|
| Hold on clean steel | 3.75 lb / 1.7 kgf | 4.85 lb / 2.2 kgf |
| Through glass | the default for notes and documents | when stacks get heavy |
| What it holds | multi-page documents, calendars, plans | laminated sheets, small tools, key fobs |
| Footprint | discreet on a busy board | maximum hold per pin |
| Price | $0.299 | $0.599 |
One practical rule: start with the small pin on a standard office board, and step up to the large only where a stack or a laminated sheet slides. Mixed orders ship as easily as single-size ones — most planning walls end up with both sizes in the same four tones.
Beyond the two stock glassboard magnetic push pins we build OEM programmes for office-supply brands and education distributors: custom housing colours and materials, private-label packaging, mixed size-and-tone assortment packs, and special pull ratings for particular board constructions. Because the magnets and housings are produced in-house, a custom glassboard magnetic push pin is a drawing and a quantity — start at custom magnets or contact us directly.
Q1: Will these pins hold on a glass whiteboard? A: That is what they are built for. The 19 mm and 29 mm sizes carry magnets large enough to keep a useful hold at the glass surface, where a standard 11 mm pin loses too much to the gap.
Q2: Why are glassboard magnetic push pins bigger than standard ones? A: Pull force falls with distance from the steel backing. Glass sits between the pin and the steel, so a bigger magnet is the only way to restore hold at the surface — the same physics that makes painted steel weaker than bare steel.
Q3: How much do they hold? A: Rated on clean steel: 3.75 lb (1.7 kgf) for the 19 mm pin and 4.85 lb (2.2 kgf) for the 29 mm pin. Through glass, hold depends on your board's thickness — we measure it on your actual board before you commit to a quantity.
Q4: What colours do they come in? A: Four office tones — black, blue, gray and green — across both sizes, so a planning wall can mix sizes while staying colour-coherent.
Q5: Will they scratch the glass? A: No — the magnet is fully enclosed in the housing, so nothing metal touches the board. Wipe dust off the face occasionally so grit never gets trapped under it.
Q6: Can I mix sizes in one order? A: Yes — both sizes are stock items and mixed cartons ship as easily as single-size ones. Most planning walls keep both: small for paper, large for heavy stacks.
Q7: Are they safe around children? A: Treat them like any small strong magnet: keep them away from small children and pets — swallowed magnets are a medical emergency. The fully-enclosed housing removes pinch and chip risks in normal use.
Q8: What is the difference between this page and the standard push pins? A: Surface and size. The standard magnetic push pins are 11 mm, eight colours, rated 0.99 lb for steel surfaces; glassboard magnetic push pins are 19 mm and 29 mm, four tones, rated 3.75–4.85 lb for glass boards.
Q9: What temperature can they take? A: Standard neodymium grades hold their rating in any normal office environment; keep continuous service under 80 °C. Higher-temperature grades are a custom order.
Q10: Can we order custom colours or private-label packaging? A: Yes — housing colours, materials, pull ratings, assortment packs and retail packaging are all standard OEM options for glassboard magnetic push pins; see the custom section above.
Two sizes, four tones, $0.299 to $0.599 — and every pull figure measured the same way as the rest of the catalogue, so the comparison across glassboard magnetic push pins is honest. Browse the glassboard magnets category for stock, or contact us with your board's glass thickness and the load you need to hold. Engineering answers the same day — including the hold measurement on your actual board.