$0.000 0

Cart

No products in the cart.

Neodymium Magnet Manufacturer | 10 Million+ Magnets in Stock

Flexible Magnetic Sheets (FM-S): 24 Stock SKUs, 7 Thicknesses, Cut-Ready

Flexible magnetic sheets are manufactured from high-quality flexible magnetic material — ferrite powder bonded into a durable synthetic-rubber matrix — which is what makes them the one magnet in our catalogue you can cut with scissors. Sheets can be trimmed, punched or die-cut into custom shapes and sizes without losing their magnetic properties, and they conform to curved or irregular surfaces that rigid magnets cannot follow.

Available with plain magnetic surfaces, coloured faces or adhesive backing, flexible magnetic sheets are the convenient answer for temporary mounting, labeling, signage, display and craft work — anywhere a lightweight, repositionable hold beats a powerful but permanent fixture. This page covers the whole stock family: 24 SKUs across A4 sheets, large-format panels and self-adhesive formats, in seven thicknesses from 0.36 mm to 3 mm, from $0.51.

What a Flexible Magnetic Sheet Is Made Of

Every one of our flexible magnetic sheets is built from the same two ingredients:

  • The magnetic filler. Ferrite powder — the same iron-oxide ceramic magnet family described in our neodymium vs ferrite materials guide — ground fine and blended throughout the sheet. Ferrite is chosen deliberately: it does not rust, needs no coating, and holds its properties outdoors and in heat.
  • The rubber matrix. A synthetic elastomer that binds the powder, gives the sheet its flexibility, and lets it lie flat against curved or textured surfaces without cracking.

The trade-off to understand honestly: this construction trades strength for flexibility. A flexible sheet holds paper, cards, signage and light packaging reliably — it is not a tool-holder, and its pull is a fraction of a rigid ferrite or NdFeB magnet of the same footprint. The pull force physics behind that trade is the same for every magnet in the catalogue.

The Thickness Ladder: Full Spec Table

All stock flexible magnetic sheets below are A4 format (11.69 × 8.27 in / 297 × 210 mm) unless noted — sized for standard office printers and die-cutting tools:

Sheet Thickness Weight Price
Coloured sheet (blue, green, red, white, yellow) 0.014 in / 0.36 mm 3.05 oz $0.512
Thin black sheet 0.03 in / 0.76 mm 4.23 oz $0.606
Standard black sheet 0.04 in / 1.0 mm 5.89 oz $0.504
White standard sheet 0.04 in / 1.0 mm 6.0 oz $0.772
Thick black sheet 0.06 in / 1.5 mm 10.07 oz $0.912
Extra thick black sheet 0.079 in / 2 mm 13.19 oz $1.241
Extra thick heavy duty black sheet 0.118 in / 3 mm 21.16 oz $2.090

Reading notes: thickness is the honest axis of this family — thicker flexible magnetic sheets carry more magnetic material per square centimetre, so hold rises with every step of the ladder, and so does weight (the 3 mm heavy-duty sheet is seven times the weight of the coloured film). The coloured 0.36 mm film is the choice for craft and light print work; the 2–3 mm black sheets are what warehouse and exhibition use actually needs. The ladder runs from $0.51 to $2.09 per A4 sheet, so sampling the whole range costs less than a coffee.

flexible magnetic sheets thickness ladder drawn to scale: colour film 0.36 mm to heavy duty 3 mm with weights and prices

Large-Format White Panels

For signage and vehicle graphics, the same material comes in two large white formats — the biggest flexible magnetic sheets in the family — printable face-up on wide-format printers:

Panel Thickness Weight Price
Thin white panel 24 × 12 in (600 × 300 mm) 0.02 in / 0.5 mm 8.06 oz $1.418
Thick white panel 24 × 12 in (600 × 300 mm) 0.04 in / 1.0 mm 16.12 oz $2.148
Thin white panel 39 × 20 in (1000 × 500 mm) 0.02 in / 0.5 mm 26.46 oz $3.825
Thick white panel 39 × 20 in (1000 × 500 mm) 0.04 in / 1.0 mm 49.38 oz $5.890

The thin 0.5 mm panels are the vehicle-magnet standard — light enough to stay flat on car panels at motorway speed; the 1.0 mm thick panels suit retail displays and exhibition walls that get handled daily. White PVC-printable faces accept solvent, eco-solvent and UV inks.

Self-Adhesive Formats

When the magnet needs to stick to a non-magnetic object instead of a fridge, the same material comes as self-adhesive flexible magnetic sheets with a peel-and-stick adhesive layer: die-cut pieces from 1.18 × 0.79 in (30 × 20 mm) upward, round discs on A4 backing, in thin (0.02 in, from $0.62) and thick (0.04 in, from $0.88) versions. The adhesive side mounts the magnet to wood, plastic or cardboard; the magnetic face does the holding.

Applications – What Can Flexible Magnetic Sheets Be Used For?

Seven proven jobs where flexible magnetic sheets earn their place, most of them running on the stock SKUs above:

  • Magnetic signs and vehicle graphics — the large white panels, printed and trimmed to shape.
  • Labels and warehouse identification — repositionable rack and shelf labels that survive reorder.
  • Refrigerator magnets and promotional products — the classic A4 giveaway format, any colour.
  • Craft and DIY projects — the 0.36 mm colour film cuts with scissors and takes glue cleanly.
  • Retail displays and exhibition graphics — thick sheets that hold POS cards through a full season.
  • Educational materials and magnetic teaching aids — cut-out letters, numbers and maps.
  • Printable magnetic media and custom die-cut products — A4 printer-safe sheets and OEM converting.

How to Cut, Print and Finish Them

Flexible magnetic sheets are the most workshop-friendly format in the catalogue — four finishing notes cover everything:

  • Cutting: scissors and knives handle everything up to 1 mm; a die or plotter cutter gives clean volume production on the thinner gauges.
  • Printing: white-faced sheets accept direct UV and screen printing; the large panels are wide-format printable. Coloured film is best used as-is or screen printed.
  • Laminating and gluing: the rubber surface bonds with standard contact adhesives; laminate after printing for outdoor vehicle signs.
  • Storage: store sheets flat or in original rolls; sharp creases can crease the magnetic filler and show as weak lines.

Why Choose NEOMAG?

  • High-quality flexible magnetic materials — consistent ferrite loading batch to batch.
  • Available with plain or self-adhesive backing — one family covers mounting both ways.
  • Easy to cut, print and fabricate — from scissors to die-cutting to wide-format print.
  • Multiple thicknesses and roll sizes available — seven gauges of flexible magnetic sheets from 0.36 mm to 3 mm, plus 24 and 39 in panels.
  • Custom converting and die-cutting services — your shape, your quantity, from our stock material.
  • Responsive customer service and technical support — material advice the same day.

Choosing in Four Steps

  1. Pick the thickness by hold. Paper and cards → 0.36–0.76 mm. Signage and POS → 1.0 mm. Warehouse, exhibition and handled displays → 1.5 mm and up. The thickness ladder above lists every stock flexible magnetic sheet at its price.
  2. Pick the surface. Printable and colour-critical → white or coloured film. Raw hold → black. Mounting to another object → self-adhesive.
  3. Pick the format. A4 sheets for print-and-cut; 24 × 12 in and 39 × 20 in panels for wide-format work; die-cut pieces for labels.
  4. Pick the quantity. Everything on this page is stock; beyond a sample set, contact us — and if you need a shape we do not stock, start at custom magnets.
choosing flexible magnetic sheets by job: craft film, signage panels and warehouse gauges with a self-adhesive branch

Custom Converting and Die-Cutting

Beyond the 24 stock flexible magnetic sheets, we convert in-house: custom die-cut shapes from your artwork, kiss-cut label stock, roll slitting to your width, and laminated or adhesive-backed constructions for OEM programmes. Because converting starts from stock material, a custom flexible magnetic sheet order is a drawing and a quantity — start at custom magnets or contact us directly.

FAQ

Q1: What are flexible magnetic sheets made of? A: Ferrite powder blended into a synthetic rubber matrix — the same corrosion-proof ferrite ceramic used in rigid magnets, in a form that cuts and bends without losing magnetism.

Q2: Can I cut flexible magnetic sheets at home? A: Yes — scissors and craft knives handle all gauges up to 1 mm cleanly, and the material loses no magnetic performance at the cut edge. For volume production, use a die or plotter cutter.

Q3: How strong are flexible magnetic sheets? A: Modest by design — they hold paper, cards, signage and light items on steel surfaces, not heavy tools. Hold rises with thickness; the 2–3 mm sheets are the strong end of the flexible magnetic sheets family.

Q4: Will they work on a fridge or whiteboard? A: Yes — any clean steel surface. They also hold on painted steel, though every coat of paint costs a little hold; the physics is the same as for any magnet.

Q5: Can I print on them? A: The white-faced sheets are made for it — direct UV and screen printing on A4, and wide-format printing on the 24 × 12 in and 39 × 20 in panels. Coloured film is best used as-is.

Q6: What is the self-adhesive version for? A: For mounting the magnet to something that is not magnetic — wood, plastic, cardboard, display foam. The adhesive attaches the sheet; the magnetic face does the holding.

Q7: Do flexible magnetic sheets lose strength over time? A: No — the ferrite filler is thermally stable, and the rubber matrix protects it. Keep continuous service under about 80 °C and store sheets flat; creases can weaken a line of the filler.

Q8: Which thickness should I choose? A: Match hold to load: 0.36–0.76 mm for paper and craft, 1.0 mm for signage and POS, 1.5–3 mm for warehouse and handled displays. When in doubt, sample the ladder — it starts at $0.51.

Q9: Are they safe around children? A: The sheet material itself is one of the safest magnet formats — large, flexible, and impossible to swallow as a whole. Cut pieces above roughly 3 cm are likewise fine; keep small cut-outs away from small children as with any magnet product.

Q10: Can you die-cut custom shapes? A: Yes — custom shapes from your artwork are a standard converting service, starting from the stock sheets on this page. See the custom section above or contact us with your drawing.

Talk to the Factory

Twenty-four stock SKUs, seven thicknesses, $0.51 to $5.89 — every one of the flexible magnetic sheets in the family listed with the same honest spec sheet, and every one of them cuttable, printable and die-cut-ready. For the whole flexible family in one view — sheets, strips and ferrous panels — start at the flexible magnets guide. Browse the magnetic sheets category for stock, or contact us with your shape and quantity — custom converting quotes the same day.